Recent projects
#1
Recent projects
Here are a couple pics of my most recent projects: I did the whole front suspension, steering, and brakes which included New Steering Rack, MM Steering Shaft, Tie Rods, ball joints, control arms, wheel bearings, Caster Camber plates, struts, calipers, rotors, stainless steel brake lines and polyurethane sway bar and end link bushings.
Other project was new aluminum radiator, 3.8 Taurus electric fan, and DCC FK-35 fan controller, and blue silicone hoses.
[IMG]local://upfiles/48206/9DA8410272954A87AAE22E1B3C68C592.jpg[/IMG]
[IMG]local://upfiles/48206/B633C2A9FF7F4D78BB1E643147F9ADDC.jpg[/IMG]
Other project was new aluminum radiator, 3.8 Taurus electric fan, and DCC FK-35 fan controller, and blue silicone hoses.
[IMG]local://upfiles/48206/9DA8410272954A87AAE22E1B3C68C592.jpg[/IMG]
[IMG]local://upfiles/48206/B633C2A9FF7F4D78BB1E643147F9ADDC.jpg[/IMG]
#4
RE: Recent projects
The fan is plenty big I think, plus the shroud covers almost the whole surface of the radiator, and with my mods I won't be heating up too much, that radiator alone should keep that engine ice cold ;-)
I like the GT40 heads but I'm thinkin about a set of AFR165's. when I'm ready I'll sell you those heads for a good price
I like the GT40 heads but I'm thinkin about a set of AFR165's. when I'm ready I'll sell you those heads for a good price
#5
RE: Recent projects
Yea are they still in good condition? and i met this guy at a car show that i think owns a junk yard near denver, and they were right off of a cobra, i was also goig to buy a cam, and rollerrockers from him, but i lost his card so i got to find the junk yard.LOL
#8
RE: Recent projects
because I get something and then read that something else is better and then I want that! It's a sickness I tell you! LOL
In any case I probably won't be getting the heads for like another 2 months if I decide to go that route and since you live close by feel free to come on by and go for a ride in the car while the GT40's are still on. I also might switch cams to if your interested in a low mileage E-303 also.
In any case I probably won't be getting the heads for like another 2 months if I decide to go that route and since you live close by feel free to come on by and go for a ride in the car while the GT40's are still on. I also might switch cams to if your interested in a low mileage E-303 also.