5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

how??

Thread Tools
 
Search this Thread
 
Old 12-31-2006, 12:16 PM
  #1  
burn rubber
1st Gear Member
Thread Starter
 
burn rubber's Avatar
 
Join Date: Nov 2006
Location:
Posts: 98
Default how??

how do u adjust the stop screws on a short shifter?
burn rubber is offline  
Old 12-31-2006, 12:20 PM
  #2  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: how??

loosen the stop screws away from the shifter shaft. Put the shifter into 3rd gear and turn the screw in until it touches the shifter shaft. tighten the jam nut and repeat this prceedure in 4th gear
AdderMk2 is offline  
Old 12-31-2006, 03:05 PM
  #3  
95gtdrop
2nd Gear Member
 
95gtdrop's Avatar
 
Join Date: Dec 2006
Location:
Posts: 251
Default RE: how??

i just went through this yesterday. it says exactly what adder said, exept when it touches the shifter, back it off slightly, like 10 thousanths of an inch.
95gtdrop is offline  




All times are GMT -5. The time now is 05:53 AM.