whats the best setup
#25
RE: whats the best setup
what about ported e7's with a z cam and explorer intake, and 24 lb injectors, on a 89 block
would this work obviously i would be upgrading hte vavletrain and hardened rods with crane 1.6 aluminum rockers
sorry for the persistance, but i m just asking these questions cause a friend has a stage 2 cam with ported e7's and it pulls hard till 6500 when he shifts
would this work obviously i would be upgrading hte vavletrain and hardened rods with crane 1.6 aluminum rockers
sorry for the persistance, but i m just asking these questions cause a friend has a stage 2 cam with ported e7's and it pulls hard till 6500 when he shifts
#26
RE: whats the best setup
ORIGINAL: ih8chevy
what about ported e7's with a z cam and explorer intake, and 24 lb injectors, on a 89 block
would this work obviously i would be upgrading hte vavletrain and hardened rods with crane 1.6 aluminum rockers
sorry for the persistance, but i m just asking these questions cause a friend has a stage 2 cam with ported e7's and it pulls hard till 6500 when he shifts
what about ported e7's with a z cam and explorer intake, and 24 lb injectors, on a 89 block
would this work obviously i would be upgrading hte vavletrain and hardened rods with crane 1.6 aluminum rockers
sorry for the persistance, but i m just asking these questions cause a friend has a stage 2 cam with ported e7's and it pulls hard till 6500 when he shifts
#28
RE: whats the best setup
ORIGINAL: AdderMk2
ported E7's is just a waste of money... Port some regular gt-40's
ORIGINAL: ih8chevy
what about ported e7's with a z cam and explorer intake, and 24 lb injectors, on a 89 block
would this work obviously i would be upgrading hte vavletrain and hardened rods with crane 1.6 aluminum rockers
sorry for the persistance, but i m just asking these questions cause a friend has a stage 2 cam with ported e7's and it pulls hard till 6500 when he shifts
what about ported e7's with a z cam and explorer intake, and 24 lb injectors, on a 89 block
would this work obviously i would be upgrading hte vavletrain and hardened rods with crane 1.6 aluminum rockers
sorry for the persistance, but i m just asking these questions cause a friend has a stage 2 cam with ported e7's and it pulls hard till 6500 when he shifts
#29
RE: whats the best setup
it wont fit in the stock block
other wise i was hopin to do a stage 2 trick flow
other wise i was hopin to do a stage 2 trick flow
ORIGINAL: Jasperstang308
that anderson cam i recommend is better than the zcam if u want a monster cam get my old cam from summit
lunati nitrous cam
560/576 300/310 110
that anderson cam i recommend is better than the zcam if u want a monster cam get my old cam from summit
lunati nitrous cam
560/576 300/310 110