EliteTuners

Alright, im cleaning up all my engine parts and internals for reassembly. And i get to my crank and im not sure if its stock or not, i found this one out in the garage and i have no idea about it?"

It has MARSKE written on the the side of the keyway. I was wondering if that could mean its grinded? Anyone know ANYTHING?

Here are the few numbers.. 2MA..8C..L4..

EliteTuners

bump

90Lxstanger

hmmmmm..... i dont think that is a Ford part number i know that

EliteTuners

That could be good news since i found the block already 30 over.

alright so if i gave u my serial # from my rods would that help maybe?

080E-A and A051 are what are on my piston for cylinder 3

90Lxstanger

well i know they go
decade/year/model/engineering office
dont really know if that's Ford either.....im not at home right now, i have a Ford parts interchange book and i would be able to look that up but sorry,i might be able to get back about this tom. or something

EliteTuners

Oh, well does anyone know the stock measurements of the crank and where to measure?

90Lxstanger

[*]Production 1983-01 302/5.0L crankshaft[*]Nodular cast iron[*]3.00" stroke[*]2.248" main journal diameter, 1.138" thrust width[*]2.123" rod journal diameter, 1.690" rod journal width

EliteTuners

How do i measure.

90Lxstanger

you would need like one of those measuring calipers at like an auto parts store, forget the exact name, maybe someone else will chime in and know

BOOK EM DANO

Dial Caliper and/or Electronic Caliper these days.