5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

purchasing 5.0 need advice

Thread Tools
 
Search this Thread
 
Old 02-03-2007, 02:14 AM
  #1  
crocop
2nd Gear Member
Thread Starter
 
crocop's Avatar
 
Join Date: Aug 2005
Location:
Posts: 366
Default purchasing 5.0 need advice

its been a while since ive posted on these forums. i used to have a 94 mustang v6 vert. well i sold that way back in augest and got a 04 grand cherokee. well in about a month once all the snows gone i want to purchase a 5L. im looking for a black or white hatchback gt 5speed. i just have some questions about these cars. first off size. how much smaller and how much leg room/head room does the 89 5.0 offer compaered to the 94 mustang. im 6'2 and have long legs. wouldve liked it better if the old stang that i had offered more leg room. also if there is a difference can the seats railsbe modified to add a bit more room. second when buying a 5.0 5 speed what should i be looking out for. third hows the ride quality in stock form. if i corner sharp will the stang stick to the road or will i spin. fourth when i do get a mustang i wanted to get a set of the 4 bolt cobra rrims there 17". whats the biggest tire size that i can put on thoose. i got a pair or 17" 275 tires that i wanted to put on. i really need some help from you guys. im dying to get a 5L and i need to have one soon. so any answers to these questions will be appreciated
crocop is offline  
Old 02-03-2007, 12:17 PM
  #2  
crocop
2nd Gear Member
Thread Starter
 
crocop's Avatar
 
Join Date: Aug 2005
Location:
Posts: 366
Default RE: purchasing 5.0 need advice

anyone please
crocop is offline  
Old 02-03-2007, 01:24 PM
  #3  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: purchasing 5.0 need advice

well on a fox there is another hole in the seat racks so it can be set back about 1.5" but leaves even less leg room for the rear seat, but really who sits back there..
as for putting 17's on a fox then the 73mm caliper are a MUST as these cars the brakes suck!
2 kwik is offline  
Old 02-03-2007, 01:37 PM
  #4  
crocop
2nd Gear Member
Thread Starter
 
crocop's Avatar
 
Join Date: Aug 2005
Location:
Posts: 366
Default RE: purchasing 5.0 need advice

when upgrading brakes do ppl usually just get bigger brakes for the front end or to ppl also toss those drum brakes and get disk. if i threw on 17" rims whats the best thing to do
crocop is offline  
Old 02-03-2007, 01:42 PM
  #5  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: purchasing 5.0 need advice

get the calipers and a master cyl...this will help a ton..also changing rotors to slotted will help as well brakes with better material
2 kwik is offline  
Old 02-03-2007, 02:12 PM
  #6  
crocop
2nd Gear Member
Thread Starter
 
crocop's Avatar
 
Join Date: Aug 2005
Location:
Posts: 366
Default RE: purchasing 5.0 need advice

oo 1more thing im not really sure about this one. i wanted to get one of thoose hoods with the cowels. if i get that does that hood still open straight up or do i have to completly remove the hood to get to the engine. srry if this sounds noobish.
crocop is offline  
Old 02-03-2007, 02:15 PM
  #7  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: purchasing 5.0 need advice

you can buy them either way
2 kwik is offline  
Old 02-03-2007, 02:40 PM
  #8  
FuzzyDiceRule
5th Gear Member
 
FuzzyDiceRule's Avatar
 
Join Date: Jun 2005
Location: San Diego, CA
Posts: 3,315
Default RE: purchasing 5.0 need advice

1 if im not mistaken the 87-93's had more leg room than the 94s and 95s, im about 96% sure about this, because one of my buddies has a 92 and a 95, and i sat in both, had alot of leg room in the 92, and i could barely get my legs in the 95 (im 64 250)
2 Just look for any rust (usually around thre hatch) and check out all (if any) mods he has)
3 you will probably spin, but you can get a couple things to stiffen it and make it handle alot better, my brothers 89 GT can take corners at 30 and you wont hear a peep out of the tires
4 Umm, i think my brothers 4 bolts are 17x9, although the front ones rub against the inner fender, and i dont know **** about tires
5 it doest really matter, its all about whether or not you want discs in the back
6 you can buy up to 3 inch cowl induction hoods(i think) and have them use the regular hardware, and up to 6(again i think) in liftoff

good luck with your car, io may be getting a 92 GT soon aswell =D i cant wait.
FuzzyDiceRule is offline  
Old 02-03-2007, 03:37 PM
  #9  
Brett88lx
 
Brett88lx's Avatar
 
Join Date: Jan 2007
Posts: 8
Default RE: purchasing 5.0 need advice

Check for rust around the torque boxes. Hope that helps. Good luck.
Brett88lx is offline  
Old 02-03-2007, 04:04 PM
  #10  
w8less
6th Gear Member
 
w8less's Avatar
 
Join Date: Feb 2005
Location: KY
Posts: 13,396
Default RE: purchasing 5.0 need advice

i am 6'3 and i sat comfortably in my old 95. but i sat in my friends 88notch and 91gt i thought the leg room was the same but thats just my .02
w8less is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Granatelli Sales
GT S197 General Discussion
5
03-25-2016 08:01 PM
Granatelli Sales
S550 2015-2023 Mustang
5
12-27-2015 06:28 PM
Meystang
5.0L (1979-1995) Mustang
5
09-25-2015 04:05 PM
JT76
Street/Strip
6
09-20-2015 11:32 AM
Pyrate Dave
5.0L (1979-1995) Mustang
8
09-10-2015 07:30 PM



Quick Reply: purchasing 5.0 need advice



All times are GMT -5. The time now is 04:30 PM.