suspension
#1
suspension
i was lookin on getting a rear upper control arm, caster camber kit and bump steer kit. and my car is a 95gt.
ARE THIS PART GOOD.
http://www.stangmods.com/Maximum-Mot...es-p/00091.htm
http://www.jegs.com/webapp/wcs/store...47991_-1_10441
http://www.stangmods.com/Steeda-Bump...04-p/00186.htm
ARE THIS PART GOOD.
http://www.stangmods.com/Maximum-Mot...es-p/00091.htm
http://www.jegs.com/webapp/wcs/store...47991_-1_10441
http://www.stangmods.com/Steeda-Bump...04-p/00186.htm
#2
RE: suspension
bumpsteer kit is better to do if you just replace the inner tie rods too. usually the stock outers are rusted on the inners. I did the whole thing in like 3 1/2 hours. you need a tie rod end seperator and a huge wrench to lossen the inner tie rods.
#4
RE: suspension
i got a set of inner tie rods on ebay for $30. brand new. the wrench you need to get the inner tie rods off the steering rack cost $30. it looks like a wrench to work on a train. i have it in my tool box and will probably never use it again.lol
#6
RE: suspension
ORIGINAL: ucjattriskey510
i was lookin on getting a rear upper control arm, caster camber kit and bump steer kit. and my car is a 95gt.
ARE THIS PART GOOD.
http://www.stangmods.com/Maximum-Mot...es-p/00091.htm
http://www.jegs.com/webapp/wcs/store...47991_-1_10441
http://www.stangmods.com/Steeda-Bump...04-p/00186.htm
i was lookin on getting a rear upper control arm, caster camber kit and bump steer kit. and my car is a 95gt.
ARE THIS PART GOOD.
http://www.stangmods.com/Maximum-Mot...es-p/00091.htm
http://www.jegs.com/webapp/wcs/store...47991_-1_10441
http://www.stangmods.com/Steeda-Bump...04-p/00186.htm
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM