jtmustang

i have heard that if u run a 1" spacer on a trickflow intake that u will have to run a cowl hood. im asking because i am runnin tfs twisted wedges a trickflow intake and roller rockers so have to run taller valve covers so then a spacer and i heard a 3/8 isn't enough anybody with the same stuff what did u have to do???

2 kwik

well I RUN a 1" spacer with my gt-40 and it's all under the stock hood

jtmustang

really i dont know where i heard that but someone said the trickflow is taller than others but i dont know so im trying to find out anybody runnin trickflow stuff??????????

2 kwik

go to their site it will have the height of intake

jtmustang

it says overall height to flange is 10.2 so how tall is the stock curious??

jtmustang

ANY BODY KNOW OR ANY BODY WITH TRICKFLOW INTAKE AND HEADS

1BIGMOFO

i have an edelbrock performer II upper and lower w/ a 1" spacer and there is NO WAY it would have fit under a stock hood. Look at my sig it sticks up far. Good luck

86HOGT

I run an 1" spacer with a GT40 lower and a Comp Cams polymer upper. If you just run a roller rockers you don't need any taller valve covers. I'm running taller valve covers because I'm also running rocker stud girdles. The stock hood had no chance of closing, so I made my own cowl out of the stock hood.

LTnone

My Track Heat setup and solid mounts that raised the engine 1/2" caused hell with clearance...You'll need a cowl.

jtmustang

really thats kinda what i thought lt it looks like u dont have a cowl though