Looky what I got.
#1
Looky what I got.
This is a 8.8 Full Race ready to go Rearend. It has been narrowed 3/4" off each side. The housing was perfectly alinged before braces were applied to help you launch straight. And the axle tubes have been reinforced with braces to prevent tube flex at the launch. All work done by Jason Pitman at Elite Race Cars in Ft.Pierce. Final assembly was done by Chet @ CRE Creations in Pt.St.Lucie. I have over 1900 invested is this rear.
It has a 3.55 Ford motorsports gear wrapped around a Moser 33 spline spool along with 33 spline moser axles and C-clip eliminators, 5/8 wheel studs (that is a 100 dollar upgrade). Moser girdle And Royal Purple 75/90 full synthetic.
I'll be buying a set of UCA's and LCA's in the next week or so. What do any of you suggest? I was thinking about going with a set of MM's. I just want to make sure I get the right stuff for this rear. The car is hardly ever driven. It's just a weekend playtoy. It's not a DD.
[IMG]local://upfiles/10184/AB0214AE96F34E419185C5A7D3BAF76A.jpg[/IMG]
[IMG]local://upfiles/10184/6B1EF91D2CFF4B0FB4432675268DAF4B.jpg[/IMG]
[IMG]local://upfiles/10184/F682AAF362E94B85BC3AD524DF6C2E4D.jpg[/IMG]
[IMG]local://upfiles/10184/0E9AD04D1F14474E8B2DE0AD6ED07B66.jpg[/IMG]
It has a 3.55 Ford motorsports gear wrapped around a Moser 33 spline spool along with 33 spline moser axles and C-clip eliminators, 5/8 wheel studs (that is a 100 dollar upgrade). Moser girdle And Royal Purple 75/90 full synthetic.
I'll be buying a set of UCA's and LCA's in the next week or so. What do any of you suggest? I was thinking about going with a set of MM's. I just want to make sure I get the right stuff for this rear. The car is hardly ever driven. It's just a weekend playtoy. It's not a DD.
[IMG]local://upfiles/10184/AB0214AE96F34E419185C5A7D3BAF76A.jpg[/IMG]
[IMG]local://upfiles/10184/6B1EF91D2CFF4B0FB4432675268DAF4B.jpg[/IMG]
[IMG]local://upfiles/10184/F682AAF362E94B85BC3AD524DF6C2E4D.jpg[/IMG]
[IMG]local://upfiles/10184/0E9AD04D1F14474E8B2DE0AD6ED07B66.jpg[/IMG]
#8
RE: Looky what I got.
Man your mosers axles came with decals on them? Mine were just plain. Thats a pretty good price by the way. I have almost 700 in my rear and don't have a girdle, bracing, 5/8 studs, c clip elimintatorsand all labor was done at my shop for free.
#9
RE: Looky what I got.
I just bought these for my new rearend.
http://cgi.ebay.com/ebaymotors/ws/eB...927&rd=1,1
Is there anything else that any of you might suggest I get to help out with making this thing work?
http://cgi.ebay.com/ebaymotors/ws/eB...927&rd=1,1
Is there anything else that any of you might suggest I get to help out with making this thing work?