1/8 mile time slip
04-08-2007, 04:18 PM
#1
1st Gear Member
Thread Starter
Join Date: Dec 2006
Location:
Posts: 103
1/8 mile time slip
The 88 Mustang got the following mods over the winter, and here is our best timeslip so far:
FRPP GT40X305 heads, E303 cam, BBK shorty headers, 1.6 scorpian roller rockers, 24 lb. injectors, 190 lph fuel pump, adjustable regulator, typhoon intake, 70mm throttle body & egr plate, 76mm C&L MAF & intake pipe, 3.55 gears.
R/T *** .173
60' *** 1.612
330' ***5.069
MPH *** 66.19
1/8 *** 7.931
MPH *** 86.18
No 1/4 mile time yet, as we only have 1/8 mile tracks close by. Will have to travel about 100 miles or so to get to a quarter mile track, like Darlington SC or Carolina Dragway in Jackson SC.
FRPP GT40X305 heads, E303 cam, BBK shorty headers, 1.6 scorpian roller rockers, 24 lb. injectors, 190 lph fuel pump, adjustable regulator, typhoon intake, 70mm throttle body & egr plate, 76mm C&L MAF & intake pipe, 3.55 gears.
R/T *** .173
60' *** 1.612
330' ***5.069
MPH *** 66.19
1/8 *** 7.931
MPH *** 86.18
No 1/4 mile time yet, as we only have 1/8 mile tracks close by. Will have to travel about 100 miles or so to get to a quarter mile track, like Darlington SC or Carolina Dragway in Jackson SC.
04-08-2007, 04:27 PM
#5
1st Gear Member
Thread Starter
Join Date: Dec 2006
Location:
Posts: 103
RE: 1/8 mile time slip
No suspension work. The only mod is removal of the front sway bar. I'm running M/T drag radials 275/50R/15. All of my previous 60' times have been in the 2.0 range as I was only launching the car at about 2000 rpm. This 60' is with a launch at about 3.5 to 4k. Any higher, it blows the tires off at the line.
04-08-2007, 04:31 PM
#8
5th Gear Member
Join Date: Jul 2006
Location: Alton, New Hampshire
Posts: 2,518
RE: 1/8 mile time slip
ORIGINAL: CHILLERMAN
No suspension work. The only mod is removal of the front sway bar. I'm running M/T drag radials 275/50R/15. All of my previous 60' times have been in the 2.0 range as I was only launching the car at about 2000 rpm. This 60' is with a launch at about 3.5 to 4k. Any higher, it blows the tires off at the line.
No suspension work. The only mod is removal of the front sway bar. I'm running M/T drag radials 275/50R/15. All of my previous 60' times have been in the 2.0 range as I was only launching the car at about 2000 rpm. This 60' is with a launch at about 3.5 to 4k. Any higher, it blows the tires off at the line.
Thats a damn good 60' for no suspension mods.... i'm not calling bs or anything.. but i would have to see it to really believe it.