bikeboyben14

i guess i was fairly impressed it made 213 and 232 ft lbs of torque. it was really lean at 16.2 . mods are c&l intake tube, 76 mm maf, 70 mm tb, 24 lb injectors, f cam, gt 40 heads, u/d pullies, long tube headers, mac catless prochamber, dumped flows

greenstreak9205

not sure if its just me, but aren't those #'s kinda low?

92hatchLX

Those numbers are horrible! Get that thing tuned asap. Can we see the dyno sheet?

crocop

doesnt a stock mustang make that amount of tourqe if not more to the wheels. i think u put a 2 instead of a 3? can you please varify this.

jewel91lx5.0

manifold and tune and it will make 260-265 to the wheels

w8less

the car was running out of fuel. the fuel pressure needs to be upped. the car should be around 250 when we put the fuel pressure regulator on.

blackride

I just dyno'ed my car and it only has a Flowmaster Exhaust ,BBK Offroad xPIPE, ColdAir Instake, 24lbs Injectorsand I am at 200/267. That's pretty much what I expected.

luckythirteen13

should be making a lot more hp then that

bikeboyben14

yup guys sorry to say thats the real numbers. i have no scanner or i would post up my sheet. it ran so lean that it lost power as it climbed up the rpms. at 5550 rpms it had 90 hp and 85 ft lbs of torque bc it had no fuel in it. once i get it straightened out its going back on the dyno. im hoping within a week or two

hot85fifty

so if thats what a mustang with those mods make then why are people saying that mine are hella low?
I made 315 to the wheels and like 335 torque and 400rwhp and 451 torque on nitrous with my air/fuel at like 10.8? way to rich. the dyno guy said if i get the air fuel fixed it should be anout 430 to the wheels. are those low for my mods?I have a very small cam for my motor its for a 302. i have smog legal heads for a 302 and a smaller then stock carb.