hatmaster0120

Ok im going to try and replace my oilpan gasket on wensday.
what would be the best way to raise the engine up.
i was think of using the manifold bolts and ataching chains to the front two and the back two. Would this work and could i leave the manifold on when i do it
any tips or advice would be great
thanks

Mikegearin

Best bet would be to remove a exhaust manifold bolt and put in a longer one and attach the chain to that.

gizim_1132

Just remove the manifold so that way you can raise it higher you will need all the heigth out of it that you can get and by the way this process is a pita

Js04sILVerBullet

I would also put in a new oil pump while the pan is off since they run only about $20