New N/A 331 dyno plot inside
#3
RE: New N/A 331 dyno plot inside
ok try this one I tried to make the pic smaller so it's easier to read
ok mods Pareraceengines.comPaul friend of mine built it not dss crap. it's 10:8:1 comp all SCAT 4340 forged crank,rods probe forged pistons main support cannon 7 qt pan PP race blancer. AFR 185 heads 58ccwith AFM high rev springs with pro magnum rockers AFM N-61 cam .544intake .568exhaust lift 110lobe track head manifold AFM 4" N/A powerpipe 70mm TB and EGR pro M billet 85mm mass air with 30lb injectors@45psi 12:8:1 AFR bbk 1 5/8" long tubes off road x pipe 2 chamber flowmasters NOT delta flow. alum flywheel crank pully and driveshaftAC and smogdelete. Lot of other mods this is just the one that have to do with hp and tq thanks.
ok mods Pareraceengines.comPaul friend of mine built it not dss crap. it's 10:8:1 comp all SCAT 4340 forged crank,rods probe forged pistons main support cannon 7 qt pan PP race blancer. AFR 185 heads 58ccwith AFM high rev springs with pro magnum rockers AFM N-61 cam .544intake .568exhaust lift 110lobe track head manifold AFM 4" N/A powerpipe 70mm TB and EGR pro M billet 85mm mass air with 30lb injectors@45psi 12:8:1 AFR bbk 1 5/8" long tubes off road x pipe 2 chamber flowmasters NOT delta flow. alum flywheel crank pully and driveshaftAC and smogdelete. Lot of other mods this is just the one that have to do with hp and tq thanks.
#7
RE: New N/A 331 dyno plot inside
ORIGINAL: WhiteFox92
Sup guys finally got my new 331 tuned and on the dyno pulled to 6300rpms but my wires were breaking up so I had to show it in mph. anyone wants to know mods feel free to ask thank.
Sup guys finally got my new 331 tuned and on the dyno pulled to 6300rpms but my wires were breaking up so I had to show it in mph. anyone wants to know mods feel free to ask thank.
#8
RE: New N/A 331 dyno plot inside
thanks man yeah it would pull higher but computer is still stock and hitting the stock rev limiter 6250-6300 cam is good till 6600rpm and yeah manifold is def holding back I re used itfrom my old 302 I'm gonna go with the RPM II or victor jr not sure yet should pull harder 4k and up. can't wait to run it should be 11's car weights 2900lbs AJE tubluar k member a arms with springs cups strange 10 way adj. all around B springs alburn diff suprior 31 spline axels TA cover lakewook upper and lower arms battle boxes shaft loop sub frames drag lites with 275/50/15 et streets skines up front
Thread
Thread Starter
Forum
Replies
Last Post