5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

New Starter and Silenoid - Still hangin up

Old Jul 14, 2007 | 11:38 AM
  #1  
FFNPTOWN's Avatar
FFNPTOWN
Thread Starter
 
Joined: Jun 2007
Posts: 4
From:
Default New Starter and Silenoid - Still hangin up

1987 Mustang GT - I am not a motorhead by no means. I know enough to hurt my pony, but this is my delima. A few weeks ago, the bendix and starter remainded engaged when I started it and even after I shut it down unitl it finally took out the bendix. I have replaced both the starter and solenoid, and it does the same thing. I have to disconnect the battery before it will stop. I have triple checked the wiring. Any other suggestions?
Old Jul 14, 2007 | 11:50 AM
  #2  
90_Mustang_GT's Avatar
90_Mustang_GT
2nd Gear Member
 
Joined: Apr 2007
Posts: 432
From:
Default RE: New Starter and Silenoid - Still hangin up

Where did you get the starter and solenoid at?
Old Jul 14, 2007 | 02:05 PM
  #3  
FFNPTOWN's Avatar
FFNPTOWN
Thread Starter
 
Joined: Jun 2007
Posts: 4
From:
Default RE: New Starter and Silenoid - Still hangin up

Both from Advance Auto. Just went back and exchagned the solenoid. Seems to have taken care of the issue....for now.

Thanks
Old Jul 14, 2007 | 02:21 PM
  #4  
89 fox's Avatar
89 fox
4th Gear Member
 
Joined: Jun 2006
Posts: 1,262
From: BATON ROUGE
Default RE: New Starter and Silenoid - Still hangin up

I had similar issues...i upgraded to a starter off of a 92-95 5.0 and no more problems....
Old Jul 14, 2007 | 04:45 PM
  #5  
red302's Avatar
red302
1st Gear Member
 
Joined: Oct 2005
Posts: 77
From:
Default RE: New Starter and Silenoid - Still hangin up

i had the same problem with my 93 GT. I removed the starter and greased it up really good and it never hung up again.
Old Jul 14, 2007 | 10:35 PM
  #6  
XSRACINGGT's Avatar
XSRACINGGT
3rd Gear Member
 
Joined: Oct 2005
Posts: 541
From: Hendersonville, NC
Default RE: New Starter and Silenoid - Still hangin up

I had the same exact problem in my 87. I found it to be faulty wiring issues. I took off the wire that goes from the key swich on top of the solenoid and wired a push button switch to that same placeand never had another problem.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SSRFUZZY
Members Other Vehicles
6
Jan 6, 2016 08:22 PM
logan409
4.6L (1996-2004 Modular) Mustang
10
Sep 26, 2015 07:43 PM
jaiidutch
Motor Swap Section
2
Sep 14, 2015 10:29 AM
wilsonro
4 Cylinder NA and Turbo
0
Sep 11, 2015 07:13 AM
daytooday
General Tech
4
Sep 1, 2015 09:33 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:17 AM.