trick flow kit
07-27-2007, 09:43 PM
#12
D.R. THE PATHETIC DORK
Thread Starter
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
RE: trick flow kit
understandable adder Iknow what you mean, However it's rare but Randy has been great to deal with as a customer
anyway I'd better stop rambling before pro yanks this thread over to general discussion
anyway I'd better stop rambling before pro yanks this thread over to general discussion
07-27-2007, 09:43 PM
#13
6th Gear Member
Join Date: Nov 2005
Location: Rochester, NY
Posts: 8,467
RE: trick flow kit
ORIGINAL: Ahnial8u
My buddy just done this with his 94 GT with the stock Pistons he had no issues with the clearance.
My buddy just done this with his 94 GT with the stock Pistons he had no issues with the clearance.
07-27-2007, 09:44 PM
#14
2nd Gear Member
Join Date: May 2006
Location: PA
Posts: 240
RE: trick flow kit
ORIGINAL: AdderMk2
I dont work on other peoples cars. I dont need to deal with their bull****.
ORIGINAL: mjr46
And I don't blame customers for anything!!! maybe you do![>:]
And I don't blame customers for anything!!! maybe you do![>:]
07-27-2007, 09:49 PM
#15
4th Gear Member
Join Date: Nov 2004
Location: California
Posts: 1,657
RE: trick flow kit
I also have a 94Gt and I have installed TFS Heads, Cam, Valve covers and I had no problem with stock block and pistons.
If in doubt it is good to ask, just too many kids that want to put in their .2cents and do not know what you are talking about.
You should have no cleareance problems.
Good luck.
badtz
If in doubt it is good to ask, just too many kids that want to put in their .2cents and do not know what you are talking about.
You should have no cleareance problems.
Good luck.
badtz
07-27-2007, 10:09 PM
#17
2nd Gear Member
Join Date: May 2006
Location: PA
Posts: 240
RE: trick flow kit
ORIGINAL: Rizza757
what shop is this im in the 757
what shop is this im in the 757
07-28-2007, 07:38 AM
#20
3rd Gear Member
Join Date: Oct 2005
Location: Hendersonville, NC
Posts: 541
RE: trick flow kit
I dont know if the pistons are flycut the same on the foxes as they are on the 94-95s but i installed TFS heads, and a stage 2 cam, .543/.562 lift on my 87 and it was pretty close so i retarded the cam back 2* and it was fine there. You should have no clearance issues with it. Oh, and as far as the F cam on one with TFS heads you should be fine also. Its only slightly bigger than the TFS stage 1.