Are these heads any good?
#1
Are these heads any good?
http://www.fordracingparts.com/part...rtKeyField=1828
FORD RACING “SPORTSMAN” SHORT TRACK CAST IRON CYLINDER HEADS
M-6049-N351*
I have a chance to pick up a bare set for 375 OBO brand new?
That's 375 OBO CANADIAN.
what do you guys think.
Would i have to use the specified parts they say t use, or can i get some different valve and stuff?
Thanks, Nik
FORD RACING “SPORTSMAN” SHORT TRACK CAST IRON CYLINDER HEADS
M-6049-N351*
I have a chance to pick up a bare set for 375 OBO brand new?
That's 375 OBO CANADIAN.
what do you guys think.
Would i have to use the specified parts they say t use, or can i get some different valve and stuff?
Thanks, Nik
#2
RE: Are these heads any good?
I was looking on ebay and they are going for 899.99 USA and 427 to ship to me. This is a bre head price also, so i guess the 375 OBO CAD is a good price. But are the heads good flowing heads? Anyone have any flow chart for them?
Thanks, Nik
Thanks, Nik
#3
RE: Are these heads any good?
here are some flow numbers i picked up :
Ford N351 Iron
195/67
2.020/1.600
4.040
No Pipe
64
-
141/97 - .200
68.8%
160/127 -.300
79.4%
49.9/63.2
148/187
.576/.577
329 hp
212/142 -.400
67.0%
66.2/70.6
196/209
.572/.484
436
473 hp
232/161 -.500
69.4%
72.4/80.1
214/237
.501/.439
477
518 hp
244/169 -.600
69.3%
76.1/84.1
226/249
.439/.384
502
545
612 hp
255/172 -.700
67.5%
79.6/85.5
236/253
.393/.335
525
569
640 hp
-
-
-
207/145 - average.
69.8%
1.31/2.57
Ford N351 Iron
195/67
2.020/1.600
4.040
No Pipe
64
-
141/97 - .200
68.8%
160/127 -.300
79.4%
49.9/63.2
148/187
.576/.577
329 hp
212/142 -.400
67.0%
66.2/70.6
196/209
.572/.484
436
473 hp
232/161 -.500
69.4%
72.4/80.1
214/237
.501/.439
477
518 hp
244/169 -.600
69.3%
76.1/84.1
226/249
.439/.384
502
545
612 hp
255/172 -.700
67.5%
79.6/85.5
236/253
.393/.335
525
569
640 hp
-
-
-
207/145 - average.
69.8%
1.31/2.57
#4
RE: Are these heads any good?
you'll need these rocker arms
see the offset pushrod cup? cant use regular rockers. they would be screamers though - but yeah you'll need 2.02 1.60 valves, and springs/retainers/keepers/seals, and you'll need to know what length valves those heads take (should be able to find out via research @ fordracing.com)
i say grab em up
see the offset pushrod cup? cant use regular rockers. they would be screamers though - but yeah you'll need 2.02 1.60 valves, and springs/retainers/keepers/seals, and you'll need to know what length valves those heads take (should be able to find out via research @ fordracing.com)
i say grab em up
#7
RE: Are these heads any good?
FYI just look at the total cost on these, the rockers are like 350 by themselves. dont get me wrong, they would be great heads, but your not getting off cheap like you thought just cause you got a deal on the actual heads
#9
RE: Are these heads any good?
yes i am just going over things not, and i think i iwll just get another set of heads. Thanks for all the info. I know a guy that just picked up a set of AFR 185 ready to run for 1000 CAD. So i will keep my eyes open.
Thanks, Nik
Thanks, Nik
#10
RE: Are these heads any good?
ORIGINAL: 92civy
yes i am just going over things not, and i think i iwll just get another set of heads. Thanks for all the info. I know a guy that just picked up a set of AFR 185 ready to run for 1000 CAD. So i will keep my eyes open.
Thanks, Nik
yes i am just going over things not, and i think i iwll just get another set of heads. Thanks for all the info. I know a guy that just picked up a set of AFR 185 ready to run for 1000 CAD. So i will keep my eyes open.
Thanks, Nik