The best HCI combo for under $1800 ?
#41
RE: The best HCI combo for under $1800 ?
ORIGINAL: tooslow5.0
thas pretty much the setup i have. do you know how much power you made before the tweecer? are those hard to program? also were you running a stock maf tb and injectors? btw thanks-
ORIGINAL: AdderMk2
you can mill the heads, to a certain extent.. how much... i dont know
yes, 276hp... I had a full exhaust, CAI, UDP's, 15° timing, adjustable fuel pressure regulator, and I tuned it with a Tweecer R/T
you can mill the heads, to a certain extent.. how much... i dont know
yes, 276hp... I had a full exhaust, CAI, UDP's, 15° timing, adjustable fuel pressure regulator, and I tuned it with a Tweecer R/T
and yes, stock maf, stock injectors.... etc
#42
RE: The best HCI combo for under $1800 ?
ORIGINAL: my77stang
my cheapness has led me to the following package in the "best bang for the buck" type of combo. sure, a better intake and some more expensive heads could be used, but we're not looking to break the bank.
patriot aluminum heads - 895.00
typhoon intake - 275.00
random roller cam - 200.00
cloyes dble roller chain - 40.00
fel-pro gasket set - 100.00
hardened pushrods - 40.00
crane energizer RR's - 200.00
---------------------------------
total 1750.00
w00t w00t i did that on the first try too [8D]
*edited cause nothing lined up right when i posted [:@]
my cheapness has led me to the following package in the "best bang for the buck" type of combo. sure, a better intake and some more expensive heads could be used, but we're not looking to break the bank.
patriot aluminum heads - 895.00
typhoon intake - 275.00
random roller cam - 200.00
cloyes dble roller chain - 40.00
fel-pro gasket set - 100.00
hardened pushrods - 40.00
crane energizer RR's - 200.00
---------------------------------
total 1750.00
w00t w00t i did that on the first try too [8D]
*edited cause nothing lined up right when i posted [:@]
#46
RE: The best HCI combo for under $1800 ?
ORIGINAL: AdderMk2
253rwhp, 294tq
and yes, stock maf, stock injectors.... etc
ORIGINAL: tooslow5.0
thas pretty much the setup i have. do you know how much power you made before the tweecer? are those hard to program? also were you running a stock maf tb and injectors? btw thanks-
ORIGINAL: AdderMk2
you can mill the heads, to a certain extent.. how much... i dont know
yes, 276hp... I had a full exhaust, CAI, UDP's, 15° timing, adjustable fuel pressure regulator, and I tuned it with a Tweecer R/T
you can mill the heads, to a certain extent.. how much... i dont know
yes, 276hp... I had a full exhaust, CAI, UDP's, 15° timing, adjustable fuel pressure regulator, and I tuned it with a Tweecer R/T
and yes, stock maf, stock injectors.... etc
#47
RE: The best HCI combo for under $1800 ?
ORIGINAL: tooslow5.0
wow, alot of good info on this thread- thanks guys! is it possible to mill the gt40 heads to regain some compression? or does it screw up the port and bolt alignment for the intake?
wow, alot of good info on this thread- thanks guys! is it possible to mill the gt40 heads to regain some compression? or does it screw up the port and bolt alignment for the intake?
#48
RE: The best HCI combo for under $1800 ?
ORIGINAL: tooslow5.0
wow, you added 23 rwhp with the tweeker. that souns like a worthwhile mod. is that something you need to do on the dyno, is is the butt dyno sufficient?[sm=bounceybounce.gif]
wow, you added 23 rwhp with the tweeker. that souns like a worthwhile mod. is that something you need to do on the dyno, is is the butt dyno sufficient?[sm=bounceybounce.gif]
#49
RE: The best HCI combo for under $1800 ?
ORIGINAL: KovacMotorsports
You can mill then .040" before you will start having manifold alignment issues.
ORIGINAL: tooslow5.0
wow, alot of good info on this thread- thanks guys! is it possible to mill the gt40 heads to regain some compression? or does it screw up the port and bolt alignment for the intake?
wow, alot of good info on this thread- thanks guys! is it possible to mill the gt40 heads to regain some compression? or does it screw up the port and bolt alignment for the intake?
the engine ive built have only been och engines, so milling only retards the timing, which is good for the powerband usually depending on setup.
#50
RE: The best HCI combo for under $1800 ?
ORIGINAL: AdderMk2
you should never attempt to tune your car unless you are in a controlled environment, with all the proper tools to do so... otherwise you may be walking home when you melt a piston or two
ORIGINAL: tooslow5.0
wow, you added 23 rwhp with the tweeker. that souns like a worthwhile mod. is that something you need to do on the dyno, is is the butt dyno sufficient?[sm=bounceybounce.gif]
wow, you added 23 rwhp with the tweeker. that souns like a worthwhile mod. is that something you need to do on the dyno, is is the butt dyno sufficient?[sm=bounceybounce.gif]