Trailing Arms???
02-23-2005, 12:46 AM
#1
2nd Gear Member
Thread Starter
Join Date: Sep 2004
Location:
Posts: 334
Trailing Arms???
Hey all.... Well instead of building a 347 i have desided to go with a new stang
... I am thinking along the years of an 88-92 and have found a couple good deals that i am going to look in on... I was wondering which trailing(control) arms i should go with??? I am going to do complete suspention and drivetrain to geat a good start.... I am going to go with the eibach launch springs, lakewood drag shocks (70/30 front and 50/50 rear), front tubular k member and a arms... So which arms should i go with?? i was thinking about going with the hotchkis rear trailering arm kit from jegs for $351.99 Click Here... I am open to suggestions on any of the above though...
Thanks in advace...
... I am thinking along the years of an 88-92 and have found a couple good deals that i am going to look in on... I was wondering which trailing(control) arms i should go with??? I am going to do complete suspention and drivetrain to geat a good start.... I am going to go with the eibach launch springs, lakewood drag shocks (70/30 front and 50/50 rear), front tubular k member and a arms... So which arms should i go with?? i was thinking about going with the hotchkis rear trailering arm kit from jegs for $351.99 Click Here... I am open to suggestions on any of the above though...Thanks in advace...
02-23-2005, 03:01 AM
#3
2nd Gear Member
Thread Starter
Join Date: Sep 2004
Location:
Posts: 334
RE: Trailing Arms???
Thanks joe [sm=shutup.gif]!!!! Now seriously can someone other then the person sitting in the same room as me answer... geezz the guy is sitting 5 ft. away and still posts on my thread... Now back on topic please LOL....
ORIGINAL: 91hatchgt
I have a suggestion.....
They suck..... [sm=happybounce.gif][sm=happy046.gif]
I have a suggestion.....
They suck..... [sm=happybounce.gif][sm=happy046.gif]
02-23-2005, 03:20 AM
#8
2nd Gear Member
Thread Starter
Join Date: Sep 2004
Location:
Posts: 334
RE: Trailing Arms???
Well i am doing the whole suspension.... I am going to do the k member and tubular a-arms up front... If you have any suggestions please feel free to comment...... and that excludes you JOE!!!! thanks for the replies....
ORIGINAL: StangTangGT
are you just looking at upper and lower control arms?
are you just looking at upper and lower control arms?
02-23-2005, 03:28 AM
#9
3rd Gear Member
Join Date: Aug 2004
Location: cocoa beach, FL
Posts: 853
RE: Trailing Arms???
well im just asking cause i dont know too much about the a arms, but sounds like a good setup, i need to get the tubular k up front in mine and try to pull both tires off the ground. but as for upper and lowers in the rear..... these are a little better priced http://www.blueovalindustries.com/control_arms.htm. a few people use them on the forums like mdvaldosta and jdaniel and they say they work great for the price. i dont know if i have aftermarket control arms or not, but i have traction bars.
. but as for upper and lowers in the rear..... these are a little better priced http://www.blueovalindustries.com/control_arms.htm. a few people use them on the forums like mdvaldosta and jdaniel and they say they work great for the price. i dont know if i have aftermarket control arms or not, but i have traction bars.
02-23-2005, 03:31 AM
#10
3rd Gear Member
Join Date: Aug 2004
Location: cocoa beach, FL
Posts: 853