How hard is it to remove a front fender and bumper off of a 1991 lx? Thinkin bout buying a 83 t-top that has been converted over to a 91 lx front but theres a dent on the passenger side fender and the front bumper cover needs to be replaced. I have the parts, I just wanted to know how hard it was to do and if it could be done in a weekend or so. Also if I need any special tools or what not. Thanks,

 

its not too bad, there is just alot of bolts and screws to take out. it could be done in an afternoon.

 

Its not hard, just a lot of bolts and nuts, some are hard to get too... I spent an hour or two when I took mine off

 

Jack the front up, remove the wheels and fenderwell covers, you will see the bolts, also 3 on each side under the hood, need an 11mm and 8mm sockets