Removing stock A-Arm bushings
#1
Removing stock A-Arm bushings
Do the stock A-Arm bushings need to be cut out to be removed ?
They have to be pressed out from the center, so no good way to put a press on them
and after 19 years mine are good and stuck in there.
Anyone ever replaced these bushings ?
They have to be pressed out from the center, so no good way to put a press on them
and after 19 years mine are good and stuck in there.
Anyone ever replaced these bushings ?
#3
RE: Removing stock A-Arm bushings
ORIGINAL: mjr46
I used a air hammer to drive them out..it destroys them but at least there out
I used a air hammer to drive them out..it destroys them but at least there out
I have an air hammer, dont think the neighbors want me using it at 10pm though, lol
Thread
Thread Starter
Forum
Replies
Last Post
M3hunter
S197 Handling Section
0
09-05-2015 03:42 PM