bbbngowc

1991 Fox GT
5 Speed

What's involved in removing it?
Any tips to removing it?

HACKGT350

i would check out a haynes of chiltons book for this

Boss_Hotrod

My ford manual says to just remove four screws and pull it out. Ive never done one on a fox though so Im going by just what the manual says.

HACKGT350

yeah thats to take the squirl cage out itself but whats in the way of that? is there enough room to get it out from under the dash or is he gunna have to take the dash out of the way at all

Boss_Hotrod

usually the squerial cage is attached to the blower motor. Ill go look at my car and see what will be nesscessary.

Just looked at my car and then my manual again. The blower motor is on the back side of the heaterbox closest to the firewall. The heater box apperas to be in two parts. There is a big part and a smaller part on the right side where teh blower motor is housed. It looks like (from my manual) that just that peice can be removed and the motor replaced.

mjr46

just pull the blower box down = easy