studs on motor
#13
RE: studs on motor
ORIGINAL: AdderMk2
just take a picture of the motor. allowing us to see where the disty goes into the block.
just take a picture of the motor. allowing us to see where the disty goes into the block.
This 14 is printed in the valley and the side where the casting is on near where the starter bolts up.
#16
RE: studs on motor
ORIGINAL: AdderMk2
i didnt say anything about the dipstick.... i said the DISTY.. meaning distributor[:@]
i didnt say anything about the dipstick.... i said the DISTY.. meaning distributor[:@]
and no 89 it says 14 and everything else is ground down with a die grinder before i got the car.
#17
RE: studs on motor
#19
RE: studs on motor
302
D8=1978
V= Lincoln town Car
E= engine casting
6015=engine block
a3a=revised edition
8=8th year
a= 1st month (January)
23 = 23rd day
The part you are looking at is 302/5.0L engine block from a 1978 LIncoln Town Car!
Cast on January 23 1978
And that's the rest of the story.
D8=1978
V= Lincoln town Car
E= engine casting
6015=engine block
a3a=revised edition
8=8th year
a= 1st month (January)
23 = 23rd day
The part you are looking at is 302/5.0L engine block from a 1978 LIncoln Town Car!
Cast on January 23 1978
And that's the rest of the story.
#20
RE: studs on motor
ok but my engine guy said that its like a crazy block because of it having these big main caps that aren't stock any chance it could be a Mexican block or a sportsman block?