5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

95 GT stock dyno whp

Thread Tools
 
Search this Thread
 
Old May 12, 2008 | 02:02 AM
  #1  
rwdfan's Avatar
rwdfan
Thread Starter
2nd Gear Member
 
Joined: Dec 2006
Posts: 411
From: Sacramento, California
Default 95 GT stock dyno whp

What are the 95's rated at the wheels stock? I am trying to figure out about how much I am producing. I know its not much over stock most likely. All I have on the engine is 10 degrees of timing, a Cold Air Intake, unknown brand headers, and some Flowmasters. That altogether is probably only worth 15-25hp or something . I know they are rated for 215...at the crank right? So...what is it at the wheels? Thanks.
Old May 12, 2008 | 02:08 AM
  #2  
Boosted5.slow's Avatar
Boosted5.slow
1st Gear Member
 
Joined: Jan 2007
Posts: 101
From: CA
Default RE: 95 GT stock dyno whp

well i know the non 5.0 cobra are 225hp stock
Old May 12, 2008 | 02:24 AM
  #3  
rwdfan's Avatar
rwdfan
Thread Starter
2nd Gear Member
 
Joined: Dec 2006
Posts: 411
From: Sacramento, California
Default RE: 95 GT stock dyno whp

That was in the I think 93 and earlier Mustangs. They changed the ratings somewhere in there to reflect the changes in some tuning. It is rated at 215 hp and 285 tq. My 89 was rated at 225hp and 300tq. Anyways. I am looking for what the stock WHEEL HP is. Thanks!
Old May 12, 2008 | 05:47 AM
  #4  
WhiteWindsor's Avatar
WhiteWindsor
5th Gear Member
 
Joined: May 2007
Posts: 2,872
From: Warner Robins,GA
Default RE: 95 GT stock dyno whp

There is no stock WHEEL HP. You can have two identical cars and the rwhp will be a little different. 10 degree's of timing isnt helping much, what's stock 8 or 10? CAI could be hurting more that helping according to which one, are headers lt, do you have off road full exhaust. Five speen or auto. As just an estimate: with a auto you migh be looking at 176, that's with 18% drivetrain loss and a couple extra hp with upgrades. With man you might have about 185 considering drivetrain loss and your mods. So basically you have not a whole lot of power and a heavy *** car. On the flip side you do have a v8 that sounds good and can be easily made to be fast.

Old May 12, 2008 | 09:16 AM
  #5  
rwdfan's Avatar
rwdfan
Thread Starter
2nd Gear Member
 
Joined: Dec 2006
Posts: 411
From: Sacramento, California
Default RE: 95 GT stock dyno whp

I know they are a bit different. Was just curious. Yeah, its a manual, in my sig it says short throw shifter...didnt think to say it was a manual. Was just trying to figure out where I am starting from. Thanks.
Old May 12, 2008 | 09:22 AM
  #6  
WhiteWindsor's Avatar
WhiteWindsor
5th Gear Member
 
Joined: May 2007
Posts: 2,872
From: Warner Robins,GA
Default RE: 95 GT stock dyno whp

If i wasnt such an idiot i would have noticed your sig lol.
Old May 12, 2008 | 09:31 AM
  #7  
rwdfan's Avatar
rwdfan
Thread Starter
2nd Gear Member
 
Joined: Dec 2006
Posts: 411
From: Sacramento, California
Default RE: 95 GT stock dyno whp

Lol. It's ok. Its Monday Morning, I think we are all allowed a few of those. **yawn**
Old May 12, 2008 | 12:59 PM
  #8  
AdderMk2's Avatar
AdderMk2
Banned
 
Joined: Dec 2005
Posts: 22,374
From: Lil' Rhody
Default RE: 95 GT stock dyno whp

~185-190 rwhp stock
Old May 12, 2008 | 07:39 PM
  #9  
rwdfan's Avatar
rwdfan
Thread Starter
2nd Gear Member
 
Joined: Dec 2006
Posts: 411
From: Sacramento, California
Default RE: 95 GT stock dyno whp

Lol. Nice sig Mk2. Thanks for the info
Old May 12, 2008 | 09:04 PM
  #10  
golden_eye's Avatar
golden_eye
3rd Gear Member
 
Joined: Sep 2007
Posts: 761
From: Florida
Default RE: 95 GT stock dyno whp

ORIGINAL: AdderMk2

~185-190 rwhp stock
That's the general consensus, but like fastblack said no two cars are the same. You could probably bump the timing up a couple of degrees for some extra (and free)hp.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Galactic
Archive - Mustangs For Sale
10
Apr 29, 2019 02:56 PM
articman
General Tech
1
Jun 21, 2018 11:45 PM
heslekrants
Street/Strip
11
Sep 23, 2015 04:02 PM
ctgreddy
Street/Strip
11
Sep 20, 2015 08:35 PM
The01Cav
North East
0
Sep 5, 2015 03:39 PM




All times are GMT -5. The time now is 05:44 PM.