When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Hi guys thinking of swappin my rear end in my foxbody for one of a sn95 cause i wanna do the 5 lug conversion my question is i hear the axles are longer? so will that set me out too far, from me using a 15x10 tire with 275/50/r15 rubber? will i rub
or could i just use the sn95 axles with my original 8.8 from my car and shave down the axle ends.. or did i hear wrong and the axles are the same size?
dont use the sn 95 rear, like stated above get axles from a ranger from the junkyard and keep the stock width, chances are your not going to fit a 15x10 back there anyways
thx for the suggestions.. so what year ranger? and where do i get the 5 lug spindles from? same ranger.. also i can only use d/s axle. what about passenger? what would i use therE?