i used to use the ramps that you drive up unto but since i lowered my car i can't use them so i bought jack stands. here is my question. where is the best place to jack the car up from to put the stands under. if i jack it up from the usual place(right behind the wheel) the jack gets in the way of where i need to put the stand. i'm just not totally sure on where to jack the car from. sorry if this sounds like a dumb question but i never had these kinda stands before. thanks guys!

 

i normally jack it from the front K member and put the stands on the A arm bolt things, it works well

seeing as my car is probably lower than yours, and its a GT, it should work

 

is it better to put the stands there rather than behind the wheels?

 

I usually put stands under axle tubes in rear or on torque box area and on the fron t on the frame rail at the front of it where it is strongest

 

put a piece of 2x4 or 2x8 on the ground in front of your ramps and you can still drive right up onto them

 

i do the same as fuzzy... k member and control arm bolts

 

I was gonna suggest that

 

dang thats a good idea

 

at work we do the 2X4 trick for the alignment rack on lowered cars

havent had to use em at all this year, but today i had to use them 3 times!

slammed/tricked integra (pos), slammed capri 5.0, and my buddies 300c slammed on srt 20"'s

 

Ido the same as mjr. You can push the car as hard as you want and there's no way in hell the stands will slip.