Need some help.....92, A
#1
Need some help.....92, A
Don't want to sound like I REALLY don't know what's going on, but I kind of don't. I bought a 92 AOD awhile back and the guy really didn't give me all the facts. Car runs great and everything but I'm not real sure of the total setup? It has a stall convertor set for around two grand and is set up with headers. My question is there anyway that I can tell what my gearing is set to without going the extra mile? Also other things, like I thought he said something about a chip but I'll be damned if I can find any "chip".
Just wondering if someone can take me under there wing here and help me out a little. I'm good at tinkering with cars, but I'm a little lost on this one.
Also if any one has any tips for me on this paticular car and setup I'd appreciate it. I haven't done the K&N thing yet, thinking about that? Right now I need to get some tires, so I'm working on that.
I'll see if I can get a pic in here.
Thanks in advance!
Just wondering if someone can take me under there wing here and help me out a little. I'm good at tinkering with cars, but I'm a little lost on this one.
Also if any one has any tips for me on this paticular car and setup I'd appreciate it. I haven't done the K&N thing yet, thinking about that? Right now I need to get some tires, so I'm working on that.
I'll see if I can get a pic in here.
Thanks in advance!
#3
Need some help.....92, A
but i cant help u out on the gears or take u "under my wing" i dont know to much on these either, i've got a 5.0 aod for lil over a year now, and i've really suprised a lot of guys with it, so i know just by doing some lil sh*t to it, really brings them to life
#4
Need some help.....92, A
If you had a 5spd, I could tell you what gears you had by speed and RPM, but you have an AOD, I can't help you on that one. Chip is on the comp in pass side kick panel, and good tires are always a must<img border="0" src= smileys/smiley4.gif>
#5
Need some help.....92, A
Jack the car up and mark the rear tire and driveshaft. (let me think. I havent done this in a long time.) Spin the tire 1 comlete rotation and count how many times the shaft spins. 3 and 3 1/4 times would be 3.73's and so on.
#6
Need some help.....92, A
By the way you cant find a chip because you need a module. Unless I mis understood the question which is very possible because its april and we just got 6 inches of friggin snow!!!!!! Needless to say Im drunk and pissed!!!!!