5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Need Help

Thread Tools
 
Search this Thread
 
Old Jan 19, 2009 | 05:48 PM
  #1  
Dirtrider0213's Avatar
Dirtrider0213
Thread Starter
 
Joined: Jan 2009
Posts: 3
From: Nebraska
Unhappy Need Help

This is my first time posting a thread so if i am doing it wrong tell me. But any ways, I have a 95 mustang gt with the 302 in it. I am having a problem with my water temp gauge and my oil pressure gauge. They apear to be reading very high and seem to be following each other somtimes. But the car doesn't seem to be over heating like the temp gauge says. I have put in a new thermostat, a new water pump, new radiator cap, and new temp sender. But still the same. The gauges also go up when i turn my lights on or close my window. It's driving my nuts! Please help! Thanks
Old Jan 19, 2009 | 06:31 PM
  #2  
FORD TOUGH's Avatar
FORD TOUGH
4th Gear Member
 
Joined: Oct 2008
Posts: 1,107
From: Virginia
Default

Check your grounds.
Old Jan 19, 2009 | 06:34 PM
  #3  
Dirtrider0213's Avatar
Dirtrider0213
Thread Starter
 
Joined: Jan 2009
Posts: 3
From: Nebraska
Default

I have check all the grounds under the hood already. Is there any grounds behind the gauges cluster?
Old Jan 19, 2009 | 06:40 PM
  #4  
FORD TOUGH's Avatar
FORD TOUGH
4th Gear Member
 
Joined: Oct 2008
Posts: 1,107
From: Virginia
Default

No there is no ground behind the gauge cluster. Does your gauges go up when you run the window up with the motor off?
Old Jan 19, 2009 | 06:54 PM
  #5  
Dirtrider0213's Avatar
Dirtrider0213
Thread Starter
 
Joined: Jan 2009
Posts: 3
From: Nebraska
Default

No with the car not running the gauge doesn't move when you turn the lights on or roll up the window.




All times are GMT -5. The time now is 05:13 AM.