1bad6.0

hey guys who knows what best control arms are to be used in a fox body with 600hp at the crank and a 5 speed tranny?
i know i have to do the reinforcement brakets but what control arms are best to use.
i can get a set of south side upper and lower control arms but i wanna know what everyone thinks or has used

saleenpride1986

subframe connectors, full length. You should have those already if not and if thats what you mean by reinforcement brackets I have heard good things about south side, I use maximum motorsports at the moment and I have loved them since install! Haven't had any others though so I can't personally say which ones are better or worse.

1bad6.0

the car is connected already.these are the brakets i was talkin about http://www.umiperformance.com/1001?category_id=3

92Rideagain

I believe Metco makes some good control arms. Also look into Maximum Motorsports, STEEDA and Wolfe's. You really cannot go wrong with any of the above mentioned.

Detroit_Muscle

I did a lot of research and decided to go wth Megabite uppers and lowers They will be able to handle the horse power ( which I will get next year ). Since I got them have noticed a world of diffrence in how the car grips. Maximum Motersports was also on the short list.