Stock mustang 1/4 mile and 1/8
#21
Guest
Posts: n/a
Stock mustang 1/4 mile and 1/8
Originally Posted by ohsoquik02
Originally Posted by Buzzstang
my car has a stock motorr, tranny, and rear end and it ran in the 12's
but everyones deffention of stock is different.
when i say stock motor. i mean intake, rockers, heads,cam,pistons,crank,tb.and NA. pullies, coldair,mass air, headers dont count in my eyes. as having a modded motor
Your definition of stock confuses me. Do the "intake, rockers, heads, cam,pistsons, crank, tb.and NA. pullies, coldair,mass air, headers" come from the Ford factory? No? I'm confused...please someone help me. <IMG src=smileys/smiley5.gif border="0"><IMG src=smileys/smiley11.gif border="0"><IMG src=smileys/smiley11.gif border="0"></P>
#23
Stock mustang 1/4 mile and 1/8
Originally Posted by own3dbyyou
Originally Posted by ohsoquik02
Originally Posted by Buzzstang
my car has a stock motorr, tranny, and rear end and it ran in the 12's
but everyones deffention of stock is different.
when i say stock motor. i mean intake, rockers, heads,cam,pistons,crank,tb.and NA. pullies, coldair,mass air, headers dont count in my eyes. as having a modded motor
Your definition of stock confuses me. Do the "intake, rockers, heads, cam,pistsons, crank, tb.and NA. pullies, coldair,mass air, headers" come from the Ford factory? No? I'm confused...please someone help me. <img border="0" src=smileys/smiley5.gif border="0"> <img border="0" src=smileys/smiley11.gif border="0"> <img border="0" src=smileys/smiley11.gif border="0"></p>
#24
Stock mustang 1/4 mile and 1/8
Originally Posted by GSRGuy18
dude... my friend has an '02 WS6 6spd, and ran a 12.99 @ 110mph with just subframe connectors and a whisper lid with a s**tty 2.15 60' time. And don't call bs... I was there<img border="0" src=smileys/smiley2.gif border="0">
#26
Stock mustang 1/4 mile and 1/8
Originally Posted by GSRGuy18
'01 and '02s I think had the LS6 intake manifold, which increased power by 5hp (probably more). It actually might just be '02s, but I'm not sure.
#29
Stock mustang 1/4 mile and 1/8
K&N air filter could POSSIBLE show some improvement depending on how good the stock intake works. Mods like that and my muffler tend to fall in the "not really a mod" category, but gears, intake, exhaust, header(s), do not fall into that category.
#30
Stock mustang 1/4 mile and 1/8
Originally Posted by Tango 1
Originally Posted by ohsoquik02
you all the good points but what im saying is for example
i just ate two ls1s tonite on the street. one 02 camaro z28 and the other a 99 ta. i told them both i had a complete factory stock motor. i did tell them i had suspension, stall, gears,full exhaust, et streets, pullies, and efans.
they were both inpressed with the setup. both cars i ran
have low 13s timeslips.the camaro ran a best of 13.1 and the ta ran a best of 13.2.
i just ate two ls1s tonite on the street. one 02 camaro z28 and the other a 99 ta. i told them both i had a complete factory stock motor. i did tell them i had suspension, stall, gears,full exhaust, et streets, pullies, and efans.
they were both inpressed with the setup. both cars i ran
have low 13s timeslips.the camaro ran a best of 13.1 and the ta ran a best of 13.2.
I am a Mustang man but that sounds slow for 99 TA. It could have been a six banger I guess. It is hard to beat with bone stock Mustang.<img border="0" src=smileys/smiley16.gif border="0"></p>