both wires 2 coil got power = bad?
got two stangs one both wies goin to coil got power, and the other stang neither of the wires have power...lol any ideas? wire harness gotta be my prob? i found that page that tells how to fix no spark an think im stuck on this step
" Place ignition key in on, with the 12-vdc test light connected to a good ground, probe the (+) terminal at the coil (Red/Lt Green wire)...test light off = usually an ignition switch or 20 GA fuse link problem....test light on = next step."
no where is the 20 GA fuse link??? i got a brand new ignition so cant be thatbrand new dizzy+module..could go buy new coil but my coils probly good so must be this fuse link? or some other wire???
response would be nice i know erybody havn same problem sux then people repeat themselves but im just lost over here an now got no ride to work no money no way to make money ****D
" Place ignition key in on, with the 12-vdc test light connected to a good ground, probe the (+) terminal at the coil (Red/Lt Green wire)...test light off = usually an ignition switch or 20 GA fuse link problem....test light on = next step."
no where is the 20 GA fuse link??? i got a brand new ignition so cant be thatbrand new dizzy+module..could go buy new coil but my coils probly good so must be this fuse link? or some other wire???
response would be nice i know erybody havn same problem sux then people repeat themselves but im just lost over here an now got no ride to work no money no way to make money ****D
Thread
Thread Starter
Forum
Replies
Last Post
musnicki
Classic Mustang General Discussion
8
Sep 23, 2015 07:11 AM




