Sill20

My bro and I have been working on this a while a 1993 mustang LX 2.3 swapped for a 1985 5.0 got it dropped in but going from fuel injected to carburated the 5.0 distributor pig tail is where were hung up not sure what to splice it in to, there's a black, 2 reds and a purple any suggestions please? Already have the 2.3 wire harness out from the a/c and injectors but this is where were stuck now! Can't find any diagrams or articles on the net that detail what they go to on the 2.3 electrical setup.

1988TTOP

u need a fuel injected distributer if u are goin efi

Sill20

No going carburated

1988TTOP

what kind of ignition box are u runing

Sill20

We're not. We have just dis and blaster coil mad blaster II

1988TTOP

well bud u need one

Sill20

What if we go with an hei distributor?

1988TTOP

u will need one no matter what dissy u run if u r on a budget for like 30 bucks u can get a stock one u what one of a 85 mustang