I have a 95 5.0 and am looking to replace my plugs. Would you happen to know what i am going to have to remove so that I can get to them? Everything is pretty tight so I cant get a socket down in there. Also, how am i going to get a torque wrench on these things? I would greatly appreciate some advice on this one.

 

Really you don't have to remove anything. I change mine all the time (from the front reaching back), get a short ratchet and a swivel. I have never torqued sparkplugs, just nice and snug.

 

Sweet. Thanks a million. It just looks sooo tight. I thought I was going to have to pull the air intake off at least. Well, time to break out the swivel and get to work. Once again, thanks for your help..