inurface00

i have a 95 svt cobra with a built 347 stroker, aluminum twisted wedge heads solid roller cam with a 530 lift. i want to fine tune everything and i need to adjust my rockers, but i dont know what to adjust them to. Any help?

mjr46

a lot of sbf enthusiests like .020 hot, here is a guide :
http://www.nescaracing.com/valvelash.html

inurface00

is that for the intake and exhaust? iv heard some guys say its the same for both and some say there different

sharpe351

You need to set the rocker clearance to the cam card specs. My solid cam requires .025" on exhaust and .028" on intake. All cams are different, so don't take any chances. Another general rule of thumb is every 15k miles for solid lifters and 30k for solid roller. If you set them wrong, you could potentially do damage to the valvetrain.


Posted from MustangForums.com App for Android

tinman

I've always set them cold to the cam grinders specs, never have had any trouble.