Hello everyone, I need some help, recently I've put in a hurst competition shifter, the one in it before was stock, with the stock shifter, the reverse light had been working properly, but when I put in the hurst shifter, the reverse lights stay on all the time no matter what gear I am in. Any suggestions on what it could be?

 

Check this connection

http://www.latemodelrestoration.com/...dngHhoCcTrw_wc

Maybe it's disconnected or the switch itself is bad.

 

Thanks for the reply, I appreciate it

 

wouldn't be disconnected....that'd make it not light up........switch completes path for ground iirc..........unplug it.......if lights go out = bad switch...if not, there is a short in the harness to ground...... a short on the b+ side would pop fuses so issue is on the ground side

 

Good point, I typed before I thunk.....