Redneck1465

Hi guys I am really new to choosing camshafts for engines. I have a 94 Mustang that I swapped a 5.0L into. The 5.0L was out of an Explorer so its the GT-40P motor. It has 24lb injectors with 70mm throttle body plus the GT-40P heads and intake. I am looking to try and get the most power out of the motor as possible without going crazy and worrying about blowing up the lower end. I also dont want to have to put race fuel through it. Any and all suggestions would be appreciated. I heard an E303 cam would be good but I also heard that camshaft is kinda dated. Thanks for your help guys.

mjr46

e303 is a huge waste of time and money to install......you want a cam that'll live up to it's expectations....www.flowtechinduction.com pm ed and he'll deliver

Redneck1465

What is Ed's user name?

Jacob4589

If you are thinking about the e303 and like the specs it offers, look at the trickflow stage 1 cam. It's what I have in my motor (granted, it's not running right at the moment) and has a nice 2800-6200 rpm range. I'm using gt40p heads as well but with a stock 5.0ho intake for now.

mjr46

He's over on the corral.net ED CURTIS click the link in my last post that's his bussiness

Redneck1465

Thanks I appreciate it.