87FiveO

I bought euro clear headlights how the hell do these things install. I have a million tools but none of them can get those bracket bolts behind the whole assembly? Do i have to take the whole clip off?

primetime5.0

unbolt the whole assembly from the headlight panel

5.0family

just put new ones in on my 90 notch just takes a gear rachet and some pushing on the bumper and some bruses on your arm my came out nice go from under the car and taking the bumper cover off would have been eaier but i didnt have the time

87FiveO

i think i took a whole layer of skin off of my hand. I just cant get the inner marker bolt on the bottom. This is the biggest pain in the *** project yet

philthy89fifty

it is a pain but dont take your clip off thats a REAL pain trying to get to line up again. try a small wrench and some patience

cammedlx

You guys must have some fat *** hands...i can take mine out and put them back in about 15-20 minutes.

Crazyfast50stang

lol that was funny

5.0family

aye to the large hands but yea the inner marker bottom bolt was a SUPER PAIN hated it but i used a small gear wrench from underthe car and it was good

87FiveO

heres the problem.....All of the assemblys came out but those bolts that held them in didnt come out. The bolt is like fused to the screw thing. When i ratchet the bolt the whole screw moves even with a pliers holding the damn thing....How the hell do i g et those things out with out damaging the whole panel?

rmodel65

vise grips!!!! on the screw part ratchet on the back nut