My tubular K member
11-27-2005, 11:22 PM
#17
2nd Gear Member
Thread Starter
Join Date: Apr 2005
Location:
Posts: 461
11-27-2005, 11:55 PM
#19
6th Gear Member
Join Date: Jan 2004
Posts: 5,836
RE: My tubular K member
He can, that's what I was doing.
You will need CC plates if you dont have them, then eventually pickup the A arms and coil overs and such to keep the tire in the wheel well nice n good.
If he just runs the stock a-arms he will have to get a grinder and grind the leading edge on each a-arm so they can move freely up and down.
He's just going to have some nasty negative camber until he does get the rest of the kit.
You will need CC plates if you dont have them, then eventually pickup the A arms and coil overs and such to keep the tire in the wheel well nice n good.
If he just runs the stock a-arms he will have to get a grinder and grind the leading edge on each a-arm so they can move freely up and down.
He's just going to have some nasty negative camber until he does get the rest of the kit.