Paz1986

im deciding on whether or not to use a different cam in my 95 5.0 its a daily driver and i want it to idle almost stock maybe a lil higher. i dont want no 1500 minimum idle crap!

619socalstang

b303

Paz1986

whats the awevage cost and will it idle smoth?

horatio102

www.summitracing.com
www.jegs.com

I've got an F303 and it idles great at about 800-850

speaking of that, it's sunny out I might have to go for a drive!

vfast

well put in some 1.7 rockers will help!

mkspeed26

</P>


it sunny here too, but it is also a -30 degree wind chill. no school today<IMG src=smileys/smiley4.gif border="0">. check out www.summitracing.com. they can help you pick the right cam. </P>

619socalstang

most people will advise against 1.7 alot of work Vs power Ie: springs pistons

Paz1986

</P>


</P>


yo where r u from? im from long island, ny and its cold as hell with 6 inches of snow outside!</P>

TheGmKiller331

I have an ELGIAN race cam and it idles choppy and at about 500-550 rpm but i dont think thats what you want.This thing is LOPEY!It really shakes the s**t out of the car and with solid mounts you feel it in your teeth!</P>


But to answer your question the best cam is not the same for everyone it depends on your plans and mods to the engine.If this is a dalily driven car you obviously (UNLESS YOU ARE ME) wouldnt want a choppy idle that lopes real hard.The best cam is the one thats designed to take advantage of your mods to the fullest.</P>


What are your plans for this?Give us more info.To be honest im not personally a big fan of the factory camshafts.Theyre good and all its just that they dont really offer a really radical setup like the aftermarket does.But that again comes down to your personal needs.</P>

T5superduty

</P>


The b-303 idles nicely at about 700-800 rpms it just dont like to be lugged down past 1500</P>