5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Dyno run on friday and tuning

Thread Tools
 
Search this Thread
 
Old Jun 12, 2007 | 04:30 PM
  #1  
piedraco's Avatar
piedraco
Thread Starter
2nd Gear Member
 
Joined: May 2007
Posts: 224
From:
Default Dyno run on friday and tuning

so since I cant figure out how to tune my own car, I have to pay someone to do it for me. I wonder what it will come out to?


mods:
347 ci
forged internals
trickflow girdle
highflow oil pump
moroso 7qt oil pan
trickflow twisted wedge heads
trickflow upper and lower intake
trickflow stage 1 cam
MAC full exhaust 2.5"
MAC shorty headers (unequal length)
bbk 75mm TB
30# injectors
MAF calibrated for 30#
lightweight aluminum flywheel
10.2:1 compression
msd 6A w spererate 6000rpm limiter
tremec t-56
3.55 gears
Old Jun 12, 2007 | 04:36 PM
  #2  
Gary H's Avatar
Gary H
4th Gear Member
 
Joined: Mar 2007
Posts: 1,080
From: Chandler, Az
Default RE: Dyno run on friday and tuning

340RWHP/380tq is my guess...
Old Jun 12, 2007 | 06:10 PM
  #3  
ruger311's Avatar
ruger311
4th Gear Member
 
Joined: Apr 2006
Posts: 1,770
From:
Default RE: Dyno run on friday and tuning

im going to go out on a limb here and say 380RWHP and 405 RWTQ
Old Jun 14, 2007 | 12:48 AM
  #4  
piedraco's Avatar
piedraco
Thread Starter
2nd Gear Member
 
Joined: May 2007
Posts: 224
From:
Default RE: Dyno run on friday and tuning

i'm thinking about adding a 100 shot when I get the dyno done. What does a system like that go for, the easy system not the complicated one (dry or wet?)
Old Jun 14, 2007 | 10:22 AM
  #5  
ROTTITANK's Avatar
ROTTITANK
3rd Gear Member
 
Joined: Apr 2006
Posts: 806
From: Pasadena,MD
Default RE: Dyno run on friday and tuning

374hp-412tq
Old Jun 14, 2007 | 10:47 AM
  #6  
GT350's Avatar
GT350
1st Gear Member
 
Joined: May 2007
Posts: 133
From:
Default RE: Dyno run on friday and tuning

I say 400+ hp and torque, I cant wiat to hear. I just finished my 347 set up and have driven it about 250 miles so far, and doing the fine tuning as I go, but mines carbuerated so no hard to do. I have RPM alluminum2.02heads, Hurricane intake, 750 DP carb, Eagle rotating assembly 10.5 compression, roller rockers, .558 lift, long tube headers,World class5 speed and 3.73 rear with a 7,000 revlimiter,I was making around 350 hp with my 306, now it seams like a big difference in both touque and hp. I can't wait till I twist it hard! BTW why a limit at 6,000? Your set up should see 6500+
Old Jun 14, 2007 | 10:53 AM
  #7  
piedraco's Avatar
piedraco
Thread Starter
2nd Gear Member
 
Joined: May 2007
Posts: 224
From:
Default RE: Dyno run on friday and tuning

I bought the car with the MSD already installed. funny thing is that the factory tach goes well beyond 6000 when i punch it down the street. I dont think that crap works but maybe the tach is off by a little. I have all eagle rotating assembly as well. you really think it will be over 400? damn man thanks for the optimisim. Friday I will post my numbers I really hope i'm over 400 with the all the money that I dumped into this engine.its way faster than my buddies cobra for sure. I raced his 03 and I dogged him.
Old Jun 14, 2007 | 11:04 AM
  #8  
GT350's Avatar
GT350
1st Gear Member
 
Joined: May 2007
Posts: 133
From:
Default RE: Dyno run on friday and tuning

I'm talking at the motor of course, probably around 375 rwhp and 390 turque, keeping my fingers crossed. I lost to a LT1 Trams am with a 150 shot a month ago,he had me by a car length in 3rd,went home and the next day yanked the motor out to go to a 347, I'm going to drive another 200 mile between now amd saturday, then go looking for him and his 2 other Trans am buddies, I have 347 inches to shove up his...........!
Old Jun 14, 2007 | 11:12 AM
  #9  
ruger311's Avatar
ruger311
4th Gear Member
 
Joined: Apr 2006
Posts: 1,770
From:
Default RE: Dyno run on friday and tuning

GT350 what CR you at?
Old Jun 14, 2007 | 11:19 AM
  #10  
GT350's Avatar
GT350
1st Gear Member
 
Joined: May 2007
Posts: 133
From:
Default RE: Dyno run on friday and tuning

CR? I guess comp. ratio...10.5



All times are GMT -5. The time now is 06:22 PM.