The stang II

How much hp/ft lbs of torque does a sn95 5.0 v8 put out? I don't kno the exact year but yea if you can tell me what kind of power they make thanks.

red95gtconvert

215hp/285 lb ft torque.

The stang II

They are the famed slow mustang right? what do they run on the track stock you kno?

Thanks man appreciate it.

w8less

yea there slightly slower but not as slow as the 96-98 mustang

The stang II

High 14's in the 1/4? Dang I thought they infact were slower than the '96's through'98s. I must have read wrong.

Thanks again so high 14's?

ctgreddy

ive heard high 14's low 15's.
and why would the 96-98's be faster?
they have smaller engines that were undeveloped when they started using them.

The stang II

idk why. I thought I read that the 4.6 was faster than the 94's and 5's. O well. Thanks guys.

luizGT91

I read that 96-98 had the exact same egine as the crown vic and the grand marquiz

95vertGTS

Any particular reason my '95 5.0could only get a15.7 then? It's completely stock

91hatchgt

my 94 ran 14.8 @ 94 stock with 200k on the clock.... My 91 ran 15.1 @ 93 stock. They are too close to say which is faster/slower. In my case, the sn95 was slightly faster. BTW, my times were at LACR which is about 2400ft. above sea level. Better times can be seen at sea level tracks so it just depends on where you are located..

A 15.7 could be a good time depending on your elevation. One guy on these forums has a procharger, and just about all the bolt on's and is only running 14's. Goes to show you how much location plays on 1/4 mile times.