Legally_Blown

Well here's my "explanation". I'm going to order a Tubular K-Member kit from UPR along with U&L control arms and Lakewood 50/50 or 70/30 shocks. My question is could I do this myself, being that I have very little to no knowledge of putting suspension? What would you guys suggest? Also, with this problem of me not knowing what to do, how long would it approximatly take if I were to do it myself? I'm on a schedule b/c I'm moving in to my dorm for college August 11. Thanks guys.

mattdel

could take quite a while if you've never done it. definately dont do it if you have to leave soon.

plan on at least 3 days. your gonna need to rent an engine hoist.

5.0stanger

I agree, it will take a little while, but should be pretty basic for you....just nuts and bolts and in and out.

Hawk

Check out this thread...

https://mustangforums.com/m_3178882/tm.htm

Another member just did this swap and he even has pics!

stang8689

It will take longer than you think

Legally_Blown

well i have just about 2 weeks to do it, but if I gotta pull the engine, i'm probably gonna take it to a shop this time and do the rear myself.

nacanitihs

nvm im an idiot and didnt read correctly

PRO50SC

Why would someone pull the engine to do a k-frame?[&:]

Legally_Blown

beats me pro. im new to all of this so....

WhiteWindsor

Arn't the motor mounts attached to k-member. You need the hoist to hold engine after you disconnect k-member.