5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

94-95 rear end swap

Thread Tools
 
Search this Thread
 
Old 10-16-2007, 03:13 PM
  #1  
neonmarine
1st Gear Member
Thread Starter
 
neonmarine's Avatar
 
Join Date: Sep 2007
Location:
Posts: 78
Default 94-95 rear end swap

NE1 every heard or seen a 94-95 8.8 rearend in a 87-93 Fox? I would do this as a cheap way to build a decent axle with Strange or Moser 5-lug axles with gears and bolt it in as a direct swap. The whole point is to keep my ride a DD while converting to a rear disc/5-lug. LMK, thanks
neonmarine is offline  
Old 10-16-2007, 07:45 PM
  #2  
neonmarine
1st Gear Member
Thread Starter
 
neonmarine's Avatar
 
Join Date: Sep 2007
Location:
Posts: 78
Default RE: 94-95 rear end swap

bump for any comments
neonmarine is offline  
Old 10-16-2007, 07:59 PM
  #3  
w8less
6th Gear Member
 
w8less's Avatar
 
Join Date: Feb 2005
Location: KY
Posts: 13,396
Default RE: 94-95 rear end swap

it will fit but will stick out 3/4 of a inch on each side if i remember. then also you have will also have to convert to disc brakes also at the same time
w8less is offline  
Old 10-16-2007, 08:27 PM
  #4  
blwn93gt
3rd Gear Member
 
blwn93gt's Avatar
 
Join Date: Jan 2007
Location: Virginia
Posts: 570
Default RE: 94-95 rear end swap

https://mustangforums.com/m_968156/tm.htm

read this!
blwn93gt is offline  
Old 10-16-2007, 08:29 PM
  #5  
black89gt
4th Gear Member
 
black89gt's Avatar
 
Join Date: Mar 2005
Location:
Posts: 1,198
Default RE: 94-95 rear end swap

http://s80.photobucket.com/albums/j1...rrent=2753.jpg

i have some pictures of it here. 17x8 rim with 275 tire with a sn95 rear end.
black89gt is offline  
Old 10-16-2007, 09:25 PM
  #6  
neonmarine
1st Gear Member
Thread Starter
 
neonmarine's Avatar
 
Join Date: Sep 2007
Location:
Posts: 78
Default RE: 94-95 rear end swap

ORIGINAL: blwn93gt

https://mustangforums.com/m_968156/tm.htm

read this!
Thats a good read!
neonmarine is offline  
Old 10-16-2007, 09:28 PM
  #7  
neonmarine
1st Gear Member
Thread Starter
 
neonmarine's Avatar
 
Join Date: Sep 2007
Location:
Posts: 78
Default RE: 94-95 rear end swap

ORIGINAL: black89gt

http://s80.photobucket.com/albums/j1...rrent=2753.jpg

i have some pictures of it here. 17x8 rim with 275 tire with a sn95 rear end.
What did you do? Get a SN95 rear end and "bolt" it in?
neonmarine is offline  
Old 10-16-2007, 09:29 PM
  #8  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: 94-95 rear end swap

ORIGINAL: Jasperstang308

it will fit but will take out 3/4 of a inch on each side if i remember. then also you have will also have to convert to disc brakes also at the same time
it ADDS 3/4" to each side... the SN is wider
AdderMk2 is offline  
Old 10-17-2007, 03:05 PM
  #9  
neonmarine
1st Gear Member
Thread Starter
 
neonmarine's Avatar
 
Join Date: Sep 2007
Location:
Posts: 78
Default RE: 94-95 rear end swap

So, whats the verdic? Can a SN95 rear end bolt in to a 1987-1993? With only a 3/4 of a inch addition to either side? With the SN95 disk brakes?
neonmarine is offline  
Old 10-17-2007, 06:43 PM
  #10  
black89gt
4th Gear Member
 
black89gt's Avatar
 
Join Date: Mar 2005
Location:
Posts: 1,198
Default RE: 94-95 rear end swap

yes I just "bolted it in" . All you really need it the rear brakes lines, the hard and soft lines. I dont have my ebrake hooked up, but i dont have to worry cause its an Auto. lol
black89gt is offline  


Quick Reply: 94-95 rear end swap



All times are GMT -5. The time now is 04:19 PM.