I just got a stock 302 with 36,000. miles on it and i'm going to install it but i don't like stock stuff . What cam can I use on a stock 5.0 without having to change the heads, springs, or rods????? I know someone knows so let me know please.

 

no one must be on this time of day!!

 

Stock valve train = stock cam

 

yeah think about it if you go with a bigger cam then u need smaller push rods at least....

 

dont half *** it on the valve train. bent valves = bad day.

IF YOUR GONNA DO IT, DO IT RIGHT and you will keep your money.

 

you go any bigger than what the stock cam is then the springs won't have the proper open and closed pressures to keep the valves open and or closed at high rpm's and the valves will float and you'll never reach the full rpm potential the new bigger cam has to offer....[&:]

 

If your intake and heads are stock don't bother with an aftermarket cam.

wtf???

 

+ about 1,000........

 

im glad im not the only one who caught that

 

hah i noticed that too... what the ****?

and stock springs wont suport any aftermarket cam