302 or 306
03-05-2008, 05:27 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 456
RE: 302 or 306
so if the the compression wont be raised much would it still be fine to run a s/c on it?
03-05-2008, 05:49 PM
3rd Gear Member
Join Date: Sep 2007
Location:
Posts: 798
RE: 302 or 306
You will be fine, if you are shooting around stock static compression.
03-05-2008, 06:47 PM
3rd Gear Member
Join Date: Aug 2007
Location: SC
Posts: 665
RE: 302 or 306
a 306 uses all the stock 302 parts ? pistons everything ?
03-05-2008, 07:05 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 456
RE: 302 or 306
Do you know what pistons i could get to keep me around the same comp. ratio
03-05-2008, 09:52 PM
3rd Gear Member
Join Date: Sep 2007
Location:
Posts: 798
RE: 302 or 306
I used the 10682-030 Probe pistons.
I am going off memory. I did it to keep me around stock compression at the time.
ponyboy302 - It uses larger pistons. Stock crankshaft and rods though!
03-05-2008, 10:29 PM
5th Gear Member
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
RE: 302 or 306
i used the same pistons that are mentioned above,good pistons and like i say with my twisted wedges im right around 9.3-9.5 which is fine for some boost 8-10 lbs
03-05-2008, 10:36 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 456
RE: 302 or 306
did you just get them out of jegs or summit?
03-05-2008, 11:05 PM
5th Gear Member
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
RE: 302 or 306
i ordered mine from a well known store cncmotorsports i think there in 1 of the dakotas
but also probe industries who makes them and could tell you everything you want to know
03-06-2008, 04:07 AM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 456
RE: 302 or 306
Alright thanks for all the help i appreciate it
03-06-2008, 10:28 AM
3rd Gear Member
Join Date: Sep 2007
Location:
Posts: 798
RE: 302 or 306
I got mine from Rick @
www.rnhperformance.com .
He will rebuild for you as well.
"From mild to wild..."