5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

306 turbo build!

Thread Tools
 
Search this Thread
 
Old Jul 1, 2008 | 07:51 PM
  #1  
tom29's Avatar
tom29
Thread Starter
1st Gear Member
 
Joined: Feb 2007
Posts: 143
From:
Default 306 turbo build!

Hey guys so i got my old block H.O 302 block stripped down and came up with a basicplan..(my current motor is starting to breathe a little blue at WOT-must be rings) anyways

bore the block to a 306 or a 310 and get stock crank rebuilt.
stock rods with 8.5-1 compression.
cometic head gaskets with AFR 185's( or osmething similar if price is right)
Comp cam 284 or a custom grind (turbo)
Holley systemax upper lower with 75mm TB
either 30 or 42lb injectors with a 290 lph pump.
stock rebuilt Garrett turbo off of a powerstroke
small basic intercooler and fab the piping myself( buddies help of course lol) or buy a kit with no turbo for $500 off ebay or some ****.
-not sure on wastegate and Bov yet-help?

this is going to be going through a 5 spd and 3.73's

comments??? suggestions???

_tom
Old Jul 1, 2008 | 09:33 PM
  #2  
90lxrider's Avatar
90lxrider
2nd Gear Member
 
Joined: Dec 2005
Posts: 384
From:
Default RE: 306 turbo build!

sounds pretty good.. go with the 306, 310 is to big, cylinder walls not thick enough, #42 injectors, custom cam, im not a big fan of the holley

should make some awesome power
Old Jul 1, 2008 | 10:16 PM
  #3  
w8less's Avatar
w8less
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: 306 turbo build!

ORIGINAL: 90lxrider

sounds pretty good.. go with the 306, 310 is to big, cylinder walls not thick enough, #42 injectors, custom cam, im not a big fan of the holley

should make some awesome power
y the holley is a kick *** intake
Old Jul 1, 2008 | 10:18 PM
  #4  
w8less's Avatar
w8less
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: 306 turbo build!

tom you could get a custom cam for close to the same price of the comp cam.

with the custom you could make more power, better driveability, and possibly better MPG's. get with jay allen camshaftinnovations.com or ed curtis flowtechinductions.com
Old Jul 1, 2008 | 11:34 PM
  #5  
jtmustang's Avatar
jtmustang
5th Gear Member
 
Joined: Nov 2006
Posts: 3,743
From: arlington,WA
Default RE: 306 turbo build!

306 turbo.................
...its what im thinking well, my motor is already built but looking hard at the quicktime systems..........
Old Jul 1, 2008 | 11:37 PM
  #6  
w8less's Avatar
w8less
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: 306 turbo build!

do it!!! like ive said before. the owner of the business is a couple hours away and post allof the time on the local boards.

with a stock motor 130,000 motor i think it was they made over 400rwhp with a tune and fuel upgrades
Old Jul 1, 2008 | 11:48 PM
  #7  
jtmustang's Avatar
jtmustang
5th Gear Member
 
Joined: Nov 2006
Posts: 3,743
From: arlington,WA
Default RE: 306 turbo build!

^^ who do it i was talking with dirty sanchez and i have been lookin at their stuff for a while their basic kit is around 2800 and claims to make right around 400rwhp with a stock block and fuel system upgrades .........[8D]
Old Jul 1, 2008 | 11:52 PM
  #8  
w8less's Avatar
w8less
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: 306 turbo build!

some guy with a black vert. it was tuned across town at the local dyno shop
Old Jul 1, 2008 | 11:58 PM
  #9  
jtmustang's Avatar
jtmustang
5th Gear Member
 
Joined: Nov 2006
Posts: 3,743
From: arlington,WA
Default RE: 306 turbo build!

right on , as my motor is not stock but the block is as that would be one worry....
Old Jul 1, 2008 | 11:59 PM
  #10  
w8less's Avatar
w8less
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: 306 turbo build!

here is a quicktime car

http://www.youtube.com/watch?v=jij1H7WBZaw



All times are GMT -5. The time now is 02:02 AM.