My gt40P install w/ pics
07-08-2008, 06:09 PM
#1
2nd Gear Member
Thread Starter
Join Date: Dec 2006
Location:
Posts: 362
My gt40P install w/ pics
Ok ive been posting up a ton of threads lately asking questions but i finally started on my head install. Got some GT40Ps of a mountaineer, theyll be going on with an explorer intake. Have the engine torn down, and just picked up the heads from the machine shop today after geting cleaned up a bit
As you may be able to tell from the engine bay the car is actually a heap of crap, which is why im calling it project turd polish, i figure its at least 1 stang that i saved from eventually going to the junk yard so thats how im trying to justify it to myself [&:].
I do have 1 more question, as you may be able to see i shimmed the springs, will i still be able to reuse the stock pushrods or will i need a different length now after the shim. Thanks
As you may be able to tell from the engine bay the car is actually a heap of crap, which is why im calling it project turd polish, i figure its at least 1 stang that i saved from eventually going to the junk yard so thats how im trying to justify it to myself [&:].
I do have 1 more question, as you may be able to see i shimmed the springs, will i still be able to reuse the stock pushrods or will i need a different length now after the shim. Thanks
07-08-2008, 07:21 PM
#8
2nd Gear Member
Thread Starter
Join Date: Dec 2006
Location:
Posts: 362
RE: My gt40P install w/ pics
ORIGINAL: coondogg
When are you putting them on?
When are you putting them on?
And my gaskets, bolts, and such just shipped yesterday should be here sometime this week.