foxes with 17x10.5
#5
I'm running 17x9 with 275s and no fender modifications, though it does need the lip rolled, rubs occasionally.
I have seen a fox with 10.5 with 315s on it though and he said he had to beat the **** out of the inner fender, roll the fender lip and run a 3/8" spacer.
I have seen a fox with 10.5 with 315s on it though and he said he had to beat the **** out of the inner fender, roll the fender lip and run a 3/8" spacer.
#6
That is because you have sn parts in the rear. Stock mustangs will fit a 9" with about 5.5 backspace and a 275 tire with no problems normally.
#8
i have an 86 gt and i just put on my new deep dish bullitts they are 10.5 the only mods i did to it as to remove the quad shock and i need to roll the fender and beat my inner wheel well alittle bit no cutting and it runs good with a 3/8 spacer and it is sits flush with my fender .running a 275/40 -17 bfg tire,sorry no pics yet
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
1
01-21-2016 01:30 PM