cylinder head identification
02-26-2009, 10:49 AM
#1
5th Gear Member
Thread Starter
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
cylinder head identification
I just got back from pullin an (5.0)H.O. out of a thunderbird along with the trans and wiring harness for my mom's car. and I noticed that the heads have the number 13 on the side of them and I don't think my e7's hae that # on them but I could be wrong, am I?
02-26-2009, 07:07 PM
#6
4th Gear Member
Join Date: Oct 2008
Location: Virginia
Posts: 1,107
I think they are E6's. I know they used them in the crown vic/ town cars til the pu the 4.6 in them. I think the only thing that got the E7's was mustang and the trucks. I have a book I will see if it says that t-bird had E6 heads.
02-26-2009, 07:12 PM
#8
5th Gear Member
Thread Starter
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
did the crown vics have h.o. motors in them
02-26-2009, 07:14 PM
#9
2nd Gear Member
Join Date: Feb 2008
Location: PA
Posts: 166
well i have a book too and it says that the e6's were used until 1987 or 88 in most of the ford and mercury non mustang and truck so what year is it... and it should have a part number somewhere under the valve cover with a e7 or e6 on it.
02-26-2009, 07:16 PM
#10
5th Gear Member
Thread Starter
Join Date: Oct 2007
Location: Georgia
Posts: 2,624