what would you do?
05-23-2009, 12:04 AM
#1
2nd Gear Member
Thread Starter
Join Date: May 2009
Location: canada
Posts: 283
what would you do?
i have a 93 lx with about 150,000 miles runs perfect,allways ran synthetic.i am buying a trf intake,trf stage 2,afr 165 heads,scorpion rr 1.6,24 pound inj,bbk 70mm tb,cl maf,mac cold air,off a guy for 3500 canadian.he is not selling till june so i still have time to back out. my other option is a new short block from www.wholesale-engines.com ,completly worked gt-40 cast heads,e cam cobra intake,65 tb,mac cold air,with stock inj and just using an adjustible pressure reg.this other combo will cost the same.the heads had port polish 5 angle and milled.not looking for a race car but just want it fun.any help with my decision would be great.i kinda want to run the first set up till the old block goes,but don't want to risk hurting anything.
05-23-2009, 06:54 PM
#3
3rd Gear Member
Join Date: Nov 2008
Location: Canada
Posts: 741
Do the first deal and don't look back... Obviously try to work him down on price but even still, the price you'll pay for all that off summit with duty, taxes and echange rate far surpass 3500$. How do I know... I just did it. Good luck!
05-23-2009, 10:17 PM
#6
2nd Gear Member
Thread Starter
Join Date: May 2009
Location: canada
Posts: 283
thanx guys ,i'll go the first route just a little nervous,everybody has thier own magic combo.from what i have read so far most of you guys know your stuff so i'll stick to this forum advice and stop listing to everyone.it's getting annoying.thanx again
Last edited by raftdaddy; 05-23-2009 at 10:24 PM.
