5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Project: POS

Thread Tools
 
Search this Thread
 
Old Jun 12, 2009 | 12:55 AM
  #31  
nacanitihs's Avatar
nacanitihs
5th Gear Member
 
Joined: Mar 2006
Posts: 3,035
From: Massachusetts, New Bedford
Default

ur doing weight savings and going with iron heads? they are like 25lbs each heavier than the aluminum's. lol

good luck with the build
Old Jun 12, 2009 | 02:36 AM
  #32  
83gtragtop's Avatar
83gtragtop
5th Gear Member
 
Joined: Aug 2006
Posts: 4,897
From: DTLA, CA
Default

Originally Posted by nacanitihs
ur doing weight savings and going with iron heads? they are like 25lbs each heavier than the aluminum's. lol

good luck with the build

The purpose of his build........


Originally Posted by fs308
its going to be a light weight car that had better run 12.x something with a stock motor. well whatever parts i need to convert it to carb stock

Last edited by 83gtragtop; Jun 12, 2009 at 02:43 AM.
Old Jun 12, 2009 | 03:58 PM
  #33  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default





Old Jun 12, 2009 | 08:02 PM
  #34  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default











Old Jun 12, 2009 | 08:41 PM
  #35  
83gtragtop's Avatar
83gtragtop
5th Gear Member
 
Joined: Aug 2006
Posts: 4,897
From: DTLA, CA
Default

^^^^ Those brakes made by ....blah?

Last edited by w8less; Mar 18, 2010 at 01:49 PM.
Old Jun 12, 2009 | 08:47 PM
  #36  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default

yes sir
Old Jun 13, 2009 | 08:38 PM
  #37  
Is1BadFord's Avatar
Is1BadFord
 
Joined: Nov 2006
Posts: 19
From: Arizona
Default

Hey Justin =D.

Make sure you let me know when that crank comes in...and also if you end up needing help on the rods.

And when the time comes for heads and a cam...you know where to come to =D.

More on topic though...it's not all that bad man...with all the parts you've got coming in for it, it should be a great little runner in no time! The stock type motors make for real sleepers in ultra light cars lol.

Cris
Old Jun 13, 2009 | 09:08 PM
  #38  
83gtragtop's Avatar
83gtragtop
5th Gear Member
 
Joined: Aug 2006
Posts: 4,897
From: DTLA, CA
Default

Originally Posted by fs308
yes sir
Definitely

Last edited by w8less; Mar 18, 2010 at 01:50 PM.
Old Jun 13, 2009 | 10:36 PM
  #39  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default

Originally Posted by 83gtragtop
Definitely.


Last edited by w8less; Mar 18, 2010 at 01:50 PM.
Old Jun 13, 2009 | 10:50 PM
  #40  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default

Originally Posted by Is1BadFord
Hey Justin =D.

Make sure you let me know when that crank comes in...and also if you end up needing help on the rods.

And when the time comes for heads and a cam...you know where to come to =D.

More on topic though...it's not all that bad man...with all the parts you've got coming in for it, it should be a great little runner in no time! The stock type motors make for real sleepers in ultra light cars lol.

Cris

i'll let you know when it comes. when i get my rear suspension bought is when the car starts coming to together and it goes on a BIG diet. what do you think about the selection so far?



All times are GMT -5. The time now is 04:42 AM.