When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Seeing as how the t45 is made for the mod motors, and they have a diff bolt pattern, I dont see it working, plus the input shaft is prob different too.
I have also heard that the t-5 and t-45 are very similar in design and internals so it would probably be a waste of money even if you could. I think the t-45 is barely stronger than the t-5.
check out like lakewood or mcleod's website and maybe they sell bellhousings for a t45 to 302. they have a crap ton of differen't combo's so its worth a shot.
check out like lakewood or mcleod's website and maybe they sell bellhousings for a t45 to 302. they have a crap ton of differen't combo's so its worth a shot.
Thats not going to help... the bellhousing is part of the case, and cannot be removed... try reading up in the thread... where it was already mentioned